Description

Pipe Size	100 PSI	150 PSI	200 PSI	228 PSI	250 PSI
50mm 2″					x
65m 2.1/2″					x
80mm 3″					x
100mm 4″					x
125mm 5″					x
150mm 6″				x	x
200mm 8″				x	x
250mm 10″				x	x
300mm 12″			x	x	x

Pipe Size	100 PSI	120 PSI	143 PSI
350m 14″			x
400mm 16″		x	x
450mm 18″		x	x
500mm 20″		x	x
550mm 22″		x	x
600mm 24″		x	x

Dimension and allowable tolerance / movement

Nominal Bore (Inner Dia.) Size	length of Bellows (mm)		Transverse Movement +/-(mm)	Axial Elongation (mm)	Axial Compression (mm)	Angular Deflection
Nominal Bore (Inner Dia.) Size	Face to Face Distance(mm)	Total Acceptable Tolerance +/-(m)	Transverse Movement +/-(mm)	Axial Elongation (mm)	Axial Compression (mm)	Angular Deflection
32mm 1.1/4″	95	3	5	5	10	15°
40m 1.1/2″	95	3	5	5	10	15°
50mm 2″	105	3	10	10	10	15°
65mm 2.1/2″	115	3	10	10	10	15°
80mm 3″	130	3	10	10	15	15°
100mm 4″	135	3	10	10	15	15°
125mm 5″	170	3	10	10	15	15°
150mm 6″	180	3	20	10	20	15°
200mm 8″	210	3	20	10	20	15°
250mm 10″	240	3	20	15	20	15°
300mm 12″	260	3	20	15	20	15°
350mm 14″	260	3	20	15	20	15°
400mm 16″	260	3	20	15	25	15°
450mm 18″	260	3	20	15	25	15°
500mm 20″	260	3	20	15	25	15°
600mm 24″	260	3	25	20	25	15°

*Although the dimensional allowance for installation is as given in the table above, When installing this connector for section purposes do not allow for its elongation

Structure

Single – Sphere

Item	Part	Material
1	Flanges	SS41 (changeable)
2	Wire	Hard Steel Wire
3	Elastomer	Synthetic Rubber
4	Reinfocing Fabric	Nylon Fabric

*Standard rubber material use are EPDM & Neoprene, or may be replace by other special rubber

Operating Condition

(based on Neoprene Rubber Material)

	32mm – 300m	350mm-600mm
Operating Pressure	16kg / cm^2(228psi)	10kg/cm^2 (143 psi)
Burst Pressure	Over 50kg / cm^2(711 psi)	Over 30kg/cm^2 (427 psi)
Negative Pressure	750mm Hg
Working Temperature	-20 °C to 100 °C (-4 °F to 212 °F)
Working Fluids	Water, Hot Water, Sea Water, Compressed Air, Steam, Solvent, Acid, Weak Alkalies