Solenoid Valve BAW-S200

Category: Tag:

Description

Brass 2/2 Way Solenoid Va;ve, BSPT (Water)
Model : BAW-S200

Specification Standards :

-Force lifting, direct acting type, diaphragm structure, can be work at 0 pressure, expanding the using area
-Plate diaphragm structure, high reliability, long life
-Valve body can be made from brass, stainless steel
-plastic encapsulating coil, be able to use under numerous environment

Fetures :

-Can be installed in any position but the level condition to keep coil upside best for long life
-Small volume, high flow, little electric power required
-Coil is design to turn in free direction
-Normally closed type
-DIN Coil IP65
-Voltage : 240 VAC, 50Hz
-Optional : 24 VDC, 50Hz
-Available upon special request

Application :

-For general and industrial services
-Applicable medium : water, light oil, air

Materials :

No. Parts Material
1 Diaphragm EPDM /NBR/Viton
2 Body Brass
3 Stem SS304
4 Coil Plastic

Note :

-Please clean up the inside of pipes before fitted
-A strainer or filter has to be installed one meter away from the solenoid valve

Test Requirements
Working pressure 150 PSI (10 Bar)
Maximum pressure 200 PSI (14 Bar)
Shell Test pressure 300 PSI (21 Bar)
Applicable temperature -5 ~ 80 °C

Dimensions (mm)

Size 1/2″ 3/4″ 1″ 1-1/4″ 1-1/2″ 2″
A 109 118 112 166 168.5 192
B 57.5 57.5 72 96 96 126
C 68 71.5 94 116.5 116.5 160.5
D 13.2 16 20.5 26 29.5 38.5
E 71.3 72 71.5 91.5 91.5 91.5
F 46.5 46.5 48.5 56.5 56.5 56.5
G 42.5 43 43.5 64.7 64.7 64.7
H 50 50 50 70 70 70